Item Specifics

CONDITION: New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions

EAN: Does Not Apply

BRAND: Unbranded

MPN: Foot 27

PRODUCT DETAILS:

The Distinctive Overcast Sewing Machine Presser Foot is designed to prevent fabric edges from fraying. Watch as this foot gives work a professional non-frayed edge. The Distinctive Overcast Sewing Machine Presser Foot is made to fit any Low Shank Snap-On Sewing Machine.

MACHINE FEET GUIDE

The first question to answer is how old is your machine? Most machines made since 1980 use snap-on feet (Except Berninas, which have their own style of attaching, and therefore need an adaptor).

Does your machine's foot screw on or snap on? If it doesn't use a screw to attach, then it's a snap-on.

If it screws on it is important to know whether your machine is a low shank, high shank, or slant needle machine. If you are not certain, you can measure using the simple instructions below:

To Measure:
When presser foot is down, measure the distance from the bottom of foot to screw-hole that holds the foot onto the presser bar.

• Singer slant is for slant needle machine only.
• A high shank machine measures approximately 1 1/4" from the screw to the bottom of the foot.
• A low shank machine measures approximately 3/4" from the screw (small dot in picture above) to the bottom of the foot.

TIPS

• Most machines made since 1980 use snap-on feet. (Except Berninas that have their own style of attaching, and therefore need an adaptor).
• If foot is not screwed on, it is a snap-on.
• All Viking machines are snap-on. Viking (Huskvarna) and Pfaff are European made.
• Most Japanese machines are snap-on (Brother).
• All Berninas need Low Shank Adaptor and use generic low shank feet.
• Singer Slant IS FOR SINGER SLANT MACHINES only. (All other Singers have snap-on or screw on feet.)
• All Featherweights use low shank feet. They are center needle position machines.
• For super high-bar lever-style Kenmore, use a High-bar adaptor.
• If you are still unsure if this our foot fits your sewing machine, then please do more research before purchasing.
•  
• If foot is not screwed on, it is a snap-on.
• All Viking machines are snap-on. Viking (Huskvarna) and Pfaff are European made.
• Most Japanese machines are snap-on (Brother).
• All Berninas need Low Shank Adaptor and use generic low shank feet.
• Singer Slant IS FOR SINGER SLANT MACHINES only. (All other Singers have snap-on or screw on feet.)
• All Featherweights use low shank feet. They are center needle position machines.
• For super high-bar lever-style Kenmore, use a High-bar adaptor.
• If you are still unsure if this our foot fits your sewing machine, then please do more research before purchasing.