Item Specifics

CONDITION: New: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitions

EAN: Does Not Apply

BRAND: Unbranded

MPN: Foot 41

PRODUCT DETAILS:

Hemmer feet are very useful tools, but are rarely seen in useful sizes this large. The Lock Wide Rolled Hemmer Presser Foot Set includes a hemmer that screw onto the included snap on presser foot. Simply pre-press the start of the hem, pressing under twice the width of the hem and feed it into the guide. The guide on the hemmer turns under the raw edge and allows it to be easily stitched into place, giving you professional looking turned hems on most medium to heavy weight fabrics.

MACHINE FEET GUIDE

The first question to answer is how old is your machine? Most machines made since 1980 use snap-on feet (Except Berninas, which have their own style of attaching, and therefore need an adaptor).

Does your machine's foot screw on or snap on? If it doesn't use a screw to attach, then it's a snap-on.

If it screws on it is important to know whether your machine is a low shank, high shank, or slant needle machine. If you are not certain, you can measure using the simple instructions below:

To Measure:
When presser foot is down, measure the distance from the bottom of foot to screw-hole that holds the foot onto the presser bar.

• Singer slant is for slant needle machine only.
• A high shank machine measures approximately 1 1/4" from the screw to the bottom of the foot.
• A low shank machine measures approximately 3/4" from the screw (small dot in picture above) to the bottom of the foot.

TIPS

• Most machines made since 1980 use snap-on feet. (Except Berninas that have their own style of attaching, and therefore need an adaptor).
• If foot is not screwed on, it is a snap-on.
• All Viking machines are snap-on. Viking (Huskvarna) and Pfaff are European made.
• Most Japanese machines are snap-on (Brother).
• All Berninas need Low Shank Adaptor and use generic low shank feet.
• Singer Slant IS FOR SINGER SLANT MACHINES only. (All other Singers have snap-on or screw on feet.)
• All Featherweights use low shank feet. They are center needle position machines.
• For super high-bar lever-style Kenmore, use a High-bar adaptor.
• If you are still unsure if this our foot fits your sewing machine, then please do more research before purchasing.