830 Point Prototype PCB Breadboard MB102 + 65pcs Jump Cable Wires + Power Module + Cable 830 Point Prototype PCB Breadboard MB102 + 65pcs Jump Cable Wires + Power Module + Cable

Ideal for high frequency and low noise circuits
Special designed spring clip over 5,000 insertion cycles

Model: MB-102
Dimension: 16.4cm x 5.2cm x 0.9cm
Tie Points: 830 Tie Points consists of: 630 Tie-Point Terminal Strip, 200 Tie-Point Distribution Strips
Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Wire size: Suitable for 20-29 AWG(0.3-0.8mm) wires

Jump Cable Wires:

65Pcs Mixed Colour Male to Male Solderless Flexible
Breadboard Jump Cable Wires
This a high quality 65-piece breadboard jumper kit
Typically used for electronics projects
And sold by us an accessory for use with our Genuine Arduino products
Wires are flexible, durable, reusable, easy to trace
Easy to connect and disconnect
Size :49 pcs 120mm length
8 pcs 160mm length
4 pcs 200mm length
4 pcs 240mm length

Power Module:

For MB102 breadboard
Breadboard power supply module, compatible with 5 V, 3.3 V
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V switchable
Maximum output current: <700>
Two road independent control, can be switched to 0V, 3.3V, 5V
On-board two sets of 3.3V, 5V DC output plug pins, convenient external lead use
Size: 5.3 x 3.1 x 2.2cm
Note: Due to the difference between different monitors, the picture may not reflect the actual colour of the item. Thank you!

Package includes:

65pcs Jumper cable x 1
MB-102 830 Point Breadboard x 1
Power Module x 1
Battery Connector x 1

Ideal for high frequency and low noise circuits
Special designed spring clip over 5,000 insertion cycles

Model: MB-102
Dimension: 16.4cm x 5.2cm x 0.9cm
Tie Points: 830 Tie Points consists of: 630 Tie-Point Terminal Strip, 200 Tie-Point Distribution Strips
Matrix: 126 separate 5 point terminals, plus 4 horizontal bus lines (Power Lines) of 50 test points each
Wire size: Suitable for 20-29 AWG(0.3-0.8mm) wires

Jump Cable Wires:

65Pcs Mixed Colour Male to Male Solderless Flexible
Breadboard Jump Cable Wires
This a high quality 65-piece breadboard jumper kit
Typically used for electronics projects
And sold by us an accessory for use with our Genuine Arduino products
Wires are flexible, durable, reusable, easy to trace
Easy to connect and disconnect
Size :49 pcs 120mm length
8 pcs 160mm length
4 pcs 200mm length
4 pcs 240mm length

Power Module:

For MB102 breadboard
Breadboard power supply module, compatible with 5 V, 3.3 V
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V switchable
Maximum output current: <700>
Two road independent control, can be switched to 0V, 3.3V, 5V
On-board two sets of 3.3V, 5V DC output plug pins, convenient external lead use
Size: 5.3 x 3.1 x 2.2cm
Note: Due to the difference between different monitors, the picture may not reflect the actual colour of the item. Thank you!

Package includes:

65pcs Jumper cable x 1
MB-102 830 Point Breadboard x 1
Power Module x 1
Battery Connector x 1